Se rendre au contenu

Garden Bag with Top Flap PP Woven Supplier India | India Pack

A PP woven garden bag with a fabric top flap that keeps contents dry and contained during outdoor storage — protecting green waste, bark chips, and compost from rain and UV between filling and collection.

Garden Bag with Top Flap — Sourced From Audited Indian Factories

A PP woven garden bag with a fabric top flap that keeps contents dry and contained during outdoor storage — protecting green waste, bark chips, and compost from rain and UV between filling and collection.

Request a Quote Send Your Specifications

Overview

The garden bag with top flap is a PP woven bulk bag fitted with an attached fabric flap — sometimes called a garden bag with lid or flap-top garden bag — that folds over and secures across the top opening. The flap keeps contents protected from rain, wind scatter, and direct UV exposure during the period between filling and collection or dispatch. It is used primarily in horticulture, landscaping, municipal green waste programmes, and retail garden centres for materials such as garden waste, hedge clippings, leaves, bark chips, compost, and topsoil.

Procurement managers evaluating this bag look at two things closely: flap fastening and fabric specification. The fastening method — ties, velcro, or drawstring — determines how reliably field operators actually close the bag; velcro degrades with repeated dirt exposure, ties are more durable in municipal programmes, drawstrings give a tighter seal on loose materials. Fabric specification matters equally: standard PP woven fabric begins to embrittle under continuous UV after several weeks outdoors, so buyers with bags stored in direct sunlight for extended periods should specify UV-stabilised yarn. The common failure mode is ordering standard fabric, placing bags outdoors for a full season, and finding splits at lift points on collection — a preventable specification error rather than a manufacturing defect.

India is the primary global source of PP woven bags in this construction. India Pack sources from a network of 10+ audited FIBC and PP woven bag manufacturers. Over ten years and 25M+ bags supplied, the operating model is procurement intermediary, not manufacturer: India Pack runs factory selection, spec verification, production oversight, and export documentation so buyers receive a factory-equivalent price without placing and managing an overseas production order directly.

Which Garden or Waste Bag Do You Need?

Your requirement Recommended
Outdoor storage with rain and UV protection between filling and collection Garden Bag with Top Flap (this page)
Open-top garden waste bag without flap cover; lower cost, immediate collection Garden Bag
Long hedge trimmings, tall cuttings — depth and shape specific to hedge waste Hedge Bag
Heavy construction rubble, dense aggregate, sand — high SWL required Builders Bag
Narrow-access or wheelbarrow-loaded sites Barrow Bag
Horticultural container growing, planting medium Planter Bag

Variants

With Carry Handles — Ties Fastening

Open carry handles on the body with a tie-fastened top flap. Ties are more resistant to repeated soiling than velcro, making this the preferred configuration for municipal green waste programmes and landscaping trade where bags are filled, collected, and emptied on a regular cycle.

Best for: Municipal green waste, landscaping contractors

Key spec: Handle type, flap dimensions, and GSM to [FILL]

With Carry Handles — Drawstring Fastening

Open carry handles with a drawstring-closed top flap, providing a tighter seal on fine or loose materials — compost, leaf litter, fine bark — that can spill or blow from a flap tied at corners only.

Best for: Retail garden centres, bagged compost and topsoil programmes

Key spec: Handle type, drawstring spec, GSM to [FILL]

Tunnel Loops — UV-Stabilised Fabric

Tunnel lift loops (no protruding handles) combined with UV-stabilised PP woven fabric. UV stabilisation is added to the yarn at extrusion and protects against fabric embrittlement during extended outdoor storage. Specify when bags are expected to sit outdoors for several weeks or through a full season.

Best for: Seasonal programmes, bags stored outdoors ahead of scheduled collection

Key spec: UV additive level, GSM, and loop capacity to [FILL]

Plain Fabric — No Handles (Depot / Skip-Liner Use)

Top flap without body handles, designed to sit inside a skip, cage, or depot container and be extracted by the container lift rather than by the bag's own loops. Reduces unit cost where bag lifting is handled by the outer container.

Best for: Skip-insert programmes, cage-based collection depots

Key spec: Body dimensions, flap overlap, GSM to [FILL]

Technical Specifications

Parameter Specification
Safe Working Load (SWL)[FILL]
Safety Factor[FILL]
Body fabricPP woven
GSM[FILL]
UV stabilisationStandard PP or UV-stabilised yarn — specify at order
Dimensions (L × W × H)Custom to order
Top closureFabric top flap — ties, drawstring, or velcro fastening (specify at order)
Bottom type[FILL]
Construction[FILL]
Lift loops / handlesOpen carry handles or tunnel loops — specify at order; no-handle variant available
Loop length[FILL]
LinerNot standard; [VERIFY per factory] if required
Coating[FILL]
PrintingAvailable; number of colours and coverage to [FILL]
Fabric colour[FILL]
CertificationsSuppliers / factories hold [VERIFY per factory]

Industries and Applications

Horticulture

What's packed: Bark chips, compost, topsoil, planting media

Why this bag: Garden centres and horticultural distributors use the top flap to protect bagged growing media from rain saturation and UV bleaching of the outer print during outdoor display. A soaked or sun-faded bag is a returns problem at the till; the flap avoids it.

Landscaping

What's packed: Garden waste, hedge clippings, leaves, grass cuttings

Why this bag: Landscaping crews fill bags on-site and leave them for collection on a later visit or by a waste contractor. The flap keeps the bag's contents from scattering in wind and prevents rain from adding significant weight between fill and collection — reducing the risk of a bag becoming too heavy to lift.

Municipal Green Waste

What's packed: Domestic garden waste, leaves, light green cuttings

Why this bag: Local authority and waste contractor programmes issue bags to residents for kerbside collection. The top flap discourages non-conforming material being placed in the bag and keeps contents contained until the collection vehicle arrives. UV-stabilised fabric is strongly recommended for bags expected to sit at kerbside for days before collection.

Retail Gardening

What's packed: Pre-bagged compost, topsoil, sand, decorative aggregates

Why this bag: Retail-shelf presentation depends on the bag arriving in print-quality condition. The flap protects the bag top during stacking and outdoor yard display, reducing damage-in-store claims from retail buyers. Drawstring-fastened flaps are preferred for fine materials where corner-tied flaps leave gaps.

Customisation Options

Structural

  • Body dimensions — length, width, height to specification
  • Flap size and overlap depth to specification
  • Bottom construction — [FILL: flat, discharge spout, or other — specify at order]
  • Fabric weight (GSM) — heavier for harder-wearing applications

Functional

  • Flap fastening style — ties, drawstring, or velcro (velcro not recommended for muddy or high-soil-contact applications)
  • Lift arrangement — open carry handles, tunnel loops, or no handles for container-insert use
  • Loop length to lifting equipment specification
  • UV-stabilised yarn — specify for bags stored outdoors beyond four weeks; UV additive level to [FILL]
  • Liner — not standard; available [VERIFY per factory] if required for fine or moist materials

Compliance

  • Certifications — held at factory level; not an India Pack certification [VERIFY per factory]
  • For construction rubble or high-density aggregate requiring a rated SWL and 5:1 safety factor, a Builders Bag is the appropriate construction — not this bag
  • For materials requiring a dust-free sealed filling environment or hazardous goods classification, the top flap is not a substitute for a sealed closure — consult separately

Branding

  • Single or multi-colour print — number of colours and panel coverage to [FILL]
  • Fabric colour — [FILL]
  • Custom label or sleeve — [VERIFY per factory]

Tell Us What You're Packing

Share your SWL requirement, bag dimensions, flap fastening preference, fabric specification (standard or UV-stabilised), and approximate order volume. India Pack will source pricing from its factory network and return a benchmarked quote.

Request a Quote Send Your Specifications

[VERIFY + RECONCILE — canonical regions list, applied site-wide]

Garden / Horticulture PP Woven
Other products
Barrow Bag PP Woven Supplier India | India Pack
Barrow Bag PP Woven Supplier India | India Pack

A PP woven bag sized and handled to pair with a standard wheelbarrow — no specialist lifting equipment, no awkward re-loading.
Bath Bag PP Woven Supplier India | India Pack
Bath Bag PP Woven Supplier India | India Pack

[FILL — verbatim copy of Section 1 hero subheadline, once written]
Garden Bag PP Woven Supplier India | India Pack
Garden Bag PP Woven Supplier India | India Pack

A handled PP woven bag sized for garden work — light enough to carry manually, tough enough for rough waste, soil, and repeated seasonal use.
Hedge Bag PP Woven Supplier India | India Pack
Hedge Bag PP Woven Supplier India | India Pack

An elongated PP woven bag proportioned to carry hedge clippings and branchy prunings without folding or forcing the cuttings.
Mineral Wool Bag PP Woven Supplier India | India Pack
Mineral Wool Bag PP Woven Supplier India | India Pack

A large-volume FIBC sized for low-density, compressible insulation materials — mineral wool, rock wool, and glass wool — where cubic capacity and a wide filling throat matter more than rated load weight.
Mineral Wool Bag with Logo PP Woven Supplier India | India Pack
Mineral Wool Bag with Logo PP Woven Supplier India | India Pack

The standard mineral wool FIBC construction with a custom-printed brand logo or design — enabling product differentiation in the insulation distribution channel without altering the functional specification.

Why source through India Pack

Full transparency — you always know your manufacturer

Once commercials are finalised, we disclose the details of the manufacturing facility producing your order. If you prefer a multi-facility portfolio strategy, we share the details of each qualified facility we've matched to your specifications.

The purchase order is raised directly in the name of the manufacturing facility — not India Pack — so there's no ambiguity about who is producing your goods. On request, we'll also arrange a direct introduction with a key contact at the facility.

We don't hide the factory behind us. You see exactly who you're buying from, and we earn our place by managing the relationship, the quality, and the documentation around it — not by controlling access to it.

Scale that works in your favour

We don't represent one buyer to one factory. India Pack brings a portfolio of buyers to a network of manufacturing facilities, and sitting in that position is what gives every buyer we work with an advantage they couldn't get alone.

It shows up first in capacity. At select facilities we hold dedicated production lines; across the rest of the network, the volume we place earns us priority. For you, that means your order isn't queued behind a factory's larger customers, and a busy season doesn't push your delivery date out.

It shows up in price. The combined volume we place gives us negotiating weight that most individual buyers can't match, so the quote you receive is competitive on a like-for-like specification — one you can hold directly against your existing suppliers and judge on the same terms.

It shows up most when something goes wrong. A factory settling a claim isn't weighing one order against the cost of fixing it; it's weighing the relationship with everything we bring them. That's the difference between a claim that drags and a claim that gets settled.

And because we're in these facilities every day, we know first-hand which one excels at a given specification, which to avoid for a particular material, and where quality actually holds. It's why we can match your bag to the right factory the first time.

The right bag, at the right weight — and the right price, every time you reorder

A bulk bag's cost is driven largely by how much fabric goes into it. Over-specify the weight and you pay for material you don't need; under-specify it and the bag fails in handling. We engineer each bag to the optimum fabric weight for your actual load and handling conditions — strong enough to perform reliably, without the cost of over-built material you'll never use.

We benchmark that specification across our facility network so your first quote is competitive — sharp because the bag is specified correctly, not because it's cut short. And we keep benchmarking on every reorder. Raw material prices move, and so should your price — down as well as up. You won't find a low opening quote that quietly drifts upward once the relationship is established. The price stays honest because we keep checking it against the market, order after order.

Transparent pricing, no separate fees

You don't pay India Pack a separate service fee or commission. We act as your level-one procurement office in India, and our pricing is all-inclusive — so you can compare our quote directly against your existing suppliers, like for like. What you save is in the price, not in a separate line item.

Order flexibility — build a container on your terms

You don't have to place a full-container order all at once, or commit to a single bag specification. Within an order you can mix specifications, and we select facilities capable of producing the range you need — so a single container can carry the mix your operation actually requires.

You can also build a container over time. Place orders as your requirement firms up, and we'll keep the container open — with the price of each order locked at the point you place it — until the load is complete. You're not forced to forecast a full container in one go or accept a price that moves while you wait.

Two practical limits keep this clean: we hold a container open for up to 20-25 days from your first order, and dispatch lead times begin once the container composition is final and the load is full. For procurement teams used to committing to full single-spec containers upfront, that flexibility removes both the forecasting pressure and the risk of over-ordering.

Factory access without factory risk

India Pack maintains active sourcing relationships with 10+ FIBC manufacturers across India. When a factory hits a capacity constraint or a quality issue, we give you the option to switch production without interrupting your supply. You don't restart vendor qualification from scratch — we carry that burden for you.

Documentation managed end to end

We manage the complete export documentation set — commercial invoice, packing list, certificate of analysis, SWL test certificates, packing inspection report, and any third-party inspection reports — so your import clearance proceeds without delays or amendment requests. We have supported buyers in Europe, USA, Canada, Middle East, Australia, and New Zealand across food processing, chemicals, construction and mineral trading.

Send us your specs and we'll come back with supplier options and a quote. Don't have them finalised? Tell us what you're packing and where it's going — we'll help you build the right specification. Distributors or end-users, you bring the requirement and we handle the supply.

Send Your Specifications

Frequently Asked Questions

We are a sourcing partner, not a factory. We connect you to a network of audited Indian manufacturers, match each order to the right plant, and manage specification, quality, and shipment on the ground.

Yes. For custom branding, we review your artwork files for resolution, print alignment, and fit to the bag geometry. If you don't have technical drawings or layouts ready, our team drafts the bag specification sheets and print-ready layouts for your approval.

We treat your designs, artwork, and intellectual property as confidential. Confidentiality terms are enforced down the supply chain with our manufacturing partners in India.

We provide free prototype samples of standard or readily available fabric specifications for your evaluation and physical testing, shipped through international couriers such as DHL, FedEx, UPS, DPD, or Interparcel.

We provide up to 2 samples completely free of cost, with courier included. Beyond that, additional samples remain free of charge and you cover only the courier.

Standard manufacturing lead time for an initial order is 5–8 weeks from final artwork and specification sign-off, with advance payment or LC opening. Repeat orders with identical specifications often run faster, as plants pre-schedule production blocks and keep printing plates ready for mounting.

Bags are hydraulically compressed, wrapped in moisture-resistant, UV-stabilised PP sheets, and bound with high-tensile bands for long transit. Each bale carries multi-sided, waterproof labels showing your PO number, bag specifications, quantities, and weights.

Average full-container transit times are 35–45 days to Europe (via the Cape), 30–40 days to the US East Coast, 35– 45 days to the US West Coast and New Zealand, and 45–55 days to Latin America. Actual schedules vary with seasonal carrier routing and whether the load is FCL or LCL. We keep you posted about the status of the shipment

Air blowing and suction remove loose PP fragments and dust using filtered, oil-free compressed air and vacuum extraction. Light-table inspection checks every seam against backlighting to catch dropped stitches, pinholes, or weave defects. if specified we run Bags though Metal detection to confirm no embedded needle fragments or metallic tools remain.

In case of a claim we are your representative to the company, We review production records alongside your photos or videos to identify the root cause. If a manufacturing defect is verified, we issue a credit or replacement and update factory protocols to prevent recurrence.

Our facilities run in-house load tests on every production run. Certified test reports and label proofs are sent to you for verification and approval before dispatch. We share pre production bag photos to confirm that bags are being mass produced as per your specification. This would include Safety Label, Print artwork, Pre production Print Panel, Printing, Bag dimensions, accesories

We provide high-strength overlock and safety stitching, along with double-needle stitching options based on your application and handling needs. Because stitching directly dictates the bag's Safe Working Load (SWL), every seam meets industrial safety standards.

Yes, we supply both J-fold and Butterfly-fold edge construction depending on your facility's filling infrastructure.

We offer single, double, and triple sift-proofing, using high-density filler cords and non-woven felt layers sewn directly into the seams to plug needle holes. For ultra-fine or hygroscopic materials, we can integrate heavy-duty polyethylene (PE) internal liners for dust-proof and moisture-proof security.

Yes, we source food-grade and pharmaceutical-grade big bags produced in BRCGS-certified cleanroom facilities that meet US FDA and European standards. These bags undergo pest control, metal detection, and hygiene audits to support contamination control for sensitive ingredients.

Type A bags provide no static protection and suit non-flammable materials. Type B bags prevent propagating brush discharges but are not rated for flammable solvent or gas atmospheres. Type C (conductive) bags use interconnected conductive threads and must be grounded during filling and discharge. Type D (dissipative) bags safely release charge into the air without a ground connection.

Yes, we offer full design flexibility including duffel tops for easy manual filling, open tops, and conical discharge spouts for sticky or sluggish materials. Our technical team matches the bag's openings to your filling and discharging equipment.

Our standard loop colours are white, blue, and black. We can provide other colours free of charge if currently in stock. For custom, Pantone-specific colours, a minimum order quantity (MOQ) of 2 MT applies.

A B-Lock (or cord lock) is a heavy-duty plastic or metal locking device attached to the tie-strings of a bag's spout, usually the discharge spout. It lets operators lock the spout closed and adjust or release it during emptying without untying tight knots.

A Hose Slider is a closure mechanism that regulates or completely stops material flow through the discharge spout. It works by sliding a rigid bar or collar over the spout to pinch it shut, giving operators precise control when partially emptying a bag.

We supply to your required safety factor. Industry standard is 5:1 for single-trip bags and 6:1 for multi-trip bags, with UN-certified bags for dangerous goods built to a 6:1 minimum.

Single-trip bags are designed for one filling and discharge cycle and are the most cost-efficient choice for one-way shipments. Multi-trip bags use heavier GSM fabric and a higher safety factor for repeated reuse. We match the construction to how the bag will be used.

Yes. We add UV stabilisers to the fabric for bags stored or handled outdoors, rated to 200 KLY to 350 KLY.

Baffle bags have internal fabric panels at the corners that hold the bag's square shape when filled, so it doesn't bulge. That lets you load more product per pallet and stack more stably in containers and warehouses. See our Baffle FIBC page for full specifications.

Coated (laminated) fabric adds a moisture and sift barrier and suits fine or hygroscopic powders. Uncoated fabric allows the bag to breathe, which suits products that need ventilation such as some agricultural goods. We recommend based on your product.

We offer loose, form-fit, and tubular polyethylene liners, EVOH liners, plus aluminium-foil liners for moisture- or oxygen-sensitive products. The liner type depends on your product's barrier needs.

The most common sizes are A4 (full-page documents and manifests) and A5 (smaller labels and barcodes). Custom sizes can also be made. Two closure options are available:
  • Standard Flap: a top or side opening with an overlapping flap to keep out dust.
  • Ziplock (resealable): maximum protection against rain, moisture, and grime.

The minimum order quantity for coloured fabric is 3 MT. A specific Pantone colour number is always required for production.

We produce woven PP fabric across a range of weights to match your strength and cost needs, from 55 GSM to 240 GSM additional coating 30 gsm

Yes. We source BOPP-laminated woven bags with high-definition print for consumer-facing and retail-grade packaging, giving sharp graphics and a moisture barrier in one structure. MOQ's apply